Click on „New Daily Program“ to start the creation of a new
daily program.
It should be mentioned at the beginning that the templates you select in the
next steps can be edited afterwards. For the sake of simplicity, it is advisable
to select templates that are also similar to your desired daily program.
|
| Vergrößern |
In the first step, you select a template. With this, the basic settings of an existing daily program are copied to the new daily program. This makes the work easier.
 |
| Vergrößern |
Then enter the desired target time, as well as the short and long name:
 |
| Vergrößern |
Go to the next page with "Next". There you can store the break regulation. Select a template for this or stick to the setting copied from the daily program you selected in the first step.
 |
| Vergrößern |
Clicking on "Next" takes you to the last step. Here you can select and store an overtime regulation.
 |
| Vergrößern |
With "Save" the daily program is created and the editing mode opens.
In edit mode, you can edit all the settings of a daily program.
 |
| Vergrößern |
Example: A validity of 00:00 to 24:00 indicates that a day is valid from 00:00 to 24:00. If a daily program should have a validity from 06:00 to 05:59, this would mean that overtime and times within the frame of 00:00 to 05:59 are attributed to the previous day. Also, a daily program automatically ends with the validity and books out the employee.
Note: In the tab Credit - "Credit in case of missing booking" you can define how the programme should behave if the employee has not logged out by the end of the validity of the daily program (e.g. because the employee has forgotten to log out).
Attention: For this you have to activate the parameter "Work out of frame" if you want to work with a frame time.
Here you can select a break template.
 |
| Vergrößern |
In the Credit tab, you can store the following settings of the daily program:
 |
| Vergrößern |
1.Credit if going booking is missing: Here you can set how the system should behave if the employee does not book out. Note that this only has an effect if the staff member has not booked out by the end of the validity of the daily program!
You have the following setting options here:
- till frame time end: The end of the frame time is taken as
the last booking.
- till core time end: The end of core time is used as the last
booking.
- till normal work time end: The end of normal working hours is
taken as the last entry.
- No credit: The employee's last booking is used as the last
booking.
Example: An employee books in at 12:15 and forgets to book out. The system will then close this booking with 12:15, so that no credit is created here. The employee must correct the times afterwards by means of a time correction request. It is recommended to use this setting!
- until going time from daily program : The time that is stored in the setting "Last going booking" is used as the last booking.
- completion up to daily target time: If the employee
forgets to book out, the booking is terminated with the time with which the
employee would reach the daily target time.
2. Last going booking: Here you can enter the time for
the setting "To go time from the daily program" of credit in case of missing go
booking.
3. Way time credit: a credit that is credited to the
employee each day. For example, a travel time credit of 5 means that 5 minutes
are credited each day.
4. Overtime treshold 1: indicates from when the
employee can work overtime. If, for example, 8:00 is entered here, this means
that the employee can only work overtime from the 8th hour.
Example: Overtime threshold = 10:00. If the employee
works more than 8:00, the time up to the 10:00 hour is always evaluated 1:1,
even if the employee has an authorisation for overtime and is in a time frame in
which overtime can occur.
5. Overtime treshold 2: indicates the daily maximum
working time. If the daily 10h capping is active, the time is capped to this
value here.
Example: Maximum working time = 12:00 and Daily 10h capping is active. The working time of the employee that exceeds 12 hours on that day moves to the background account for unvalued hours. Thus, a 12-hour cap takes place.
Here you can select a template to store overtime in a daily program.
Note: If you do not need an overtime calculation, you can skip this point.
You currently have 4 templates available which you can use and edit. For example, you can adjust the times when overtime can be earned.
| Vergrößern |
This template grants 100% overtime in the period from 00:00 to 06:00 and from 22:00 to 24:00. In the period from 06:00 - 22:00 the day programme grants 50% overtime. These overtime hours are not counted until the overtime threshold (see credit) is reached.
This template grants 100% tax-free overtime in the period 00:00 - 24:00. These overtime hours are only valued when the overtime threshold (See Credit) is reached.
This template grants 100% overtime in the period from 00:00 to 06:00 and from 22:00 to 24:00. These overtime hours are only counted when the overtime threshold (See Credit) is reached.
This template grants 50% overtime in the period from 00:00 to 24:00. These overtime hours are not counted until the overtime threshold (See Credit) is reached.
Example Adjust accounts:
If you need an overtime calculation that has the following rules:
It is best to use the template here„100% Üstd 00:00 - 06:00, 50% Üstd 06:00 – 22:00, 100% Üstd 22:00 – 24:00“
Then adjust them as follows:
If you then save, you have successfully made the change for the daily program.
Account designations
There are the following accounts depending on the template:
Example: Start at 06:00 and end at 08:00 is stored with "TP 50% p. Vor". The overtime threshold is 0. If the employee works from 07:00 to 09:00 on that day, he/she will receive 1 50% compulsory overtime, provided that the overtime calculation has been activated for the employee or he/she has received the UE authorisation for the day through the correction client.
Example: Start at 08:00 and end at 22:00 is stored with "TP 50% p. Nach". The overtime threshold is 8. If the employee works from 08:00 to 18:30 on the day, he receives 2 50% compulsory overtime hours for the time from 16:30 to 18:30, provided that the overtime calculation has been activated for the employee or he has received the UE authorisation for the day through the correction client.
Example: Start 00:00 and end 06:00 is stored with "TP 100% p. Vor". The overtime threshold is 0. If the employee works from 05:00 to 07:00 on the day, he/she receives 1 100% compulsory overtime, provided that the overtime calculation has been activated for the employee or he/she has received the UE authorisation for the day through the correction client.
Example: Start at 22:00 and end at 24:00 is stored with "TP 100% p. Nach". The overtime threshold is 0. If the employee works from 21:00 to 23:00 on the day, he/she receives 1 100% compulsory overtime, provided that the overtime calculation has been activated for the employee or he/she has received the UE authorisation for the day through the correction client.
Example: Start 00:00 and end 24:00 with "TP 100% f. Nach" is stored. The overtime threshold is 0. If the employee works from 07:00 to 09:00 on the day, he gets 2 100% free overtime hours, provided that the overtime calculation has been activated for the employee or he has received the UE authorisation for the day through the correction client.
The following options are available with regard to the daily program:
If you change and save a day programme, then you have two options if the day programme is already assigned to staff members:
ATTENTION: Since the calculation is done backwards, the values in the past may change! If you do not want this to happen, you must use the Copy option to create a copy of the day programme. This can then be changed and assigned to the weekly programme.
If the day programme has not yet been assigned to a staff member, the day programme is simply saved.
By the way, with Save & Archive you can remove day programmes that are no longer needed from the list of day programmes.
